Ocean® pool pump Vario iQ 150, 1.1 kW, up to 21 m³/h, 230 V, IE4 motor, variable speed, self-priming, large pre-filter, low-noise, MODBUS-RTU, suitable for salt electrolysis, IP55, plug-in ready

Ocean pool pump Vario iQ 150

• Variable speed
  inverter pump
• IE4 motor
  extremly quiet
• MODBUS RTU
  for external control
• Ready to plug in
  product

Description

The self-priming Ocean® Vario iQ 150 pool pump is equipped with inverter technology, is infinitely variable and can be operated at variable speed. The pump can be used for various pool sizes.

The IE4 permanent magnet motor is low-noise and highly efficient. Compared to a conventional ON/OFF pump, energy savings of up to 82 % can be achieved.

The sensorless and brushless design of the motor extends the service life of the bearings and mechanical parts.

The pump is equipped with MODBUS-RTU and therefore has an open interface for integration into iQnnect and smart home systems.

The pump can also be controlled by devices from our Aquastar series via its digital inputs. This allows you to utilise benefits such as demand-based filter performance during filtering and backwashing.

Alternatively, the control unit can also be installed up to 30 m away from the pump (minimum cable cross-section 4 x 2.5 mm²).

The difference to the Ocean® Inver iQ 300 pool pump, apart from the performance, is also in the control: With the Vario iQ 150, only the speed can be controlled, and not the volume flow as with the Inver iQ 300.

Product details

	Vario iQ 150
P1 (kW)	1.1
P2 rated power (kW)	1.28
P2 rated power (HP)	1.74
I max. (A)	10.5
Flow rate* (m³/h)	bis 21
Voltage 50/60 Hz (V)	230
Water Connection	2" IG und AG
Noise level  (db)	~ 45
Protection class	IP55
Efficiency class	IE4
Art.Nr.	7301854

* at 10 m

Delivery head: Vario iQ 150

Features

• Highly efficient, sensorless and brushless IE4 motor
• Pump housing made of glass fibre reinforced plastic
• Large pre-filter (4.6 litres) incl. 2-part transparent lid with key for easy opening
• 4 daily filter cleaning programmes, individually configurable
• Stainless steel screws and stainless steel shaft
• Stepless regulation
• Low noise level
• Self-priming
• Suitable for salt electrolysis (< 7 g/l)
• Error message for dirty pre-filter
• Input for NTC temperature sensor
• Ready to plug in
• Volume flow up to 21 m³/h at 10 m
• Speed control
• 2 drains
• IP55
• External control via MODBUS-RTU, analogue input 0-10 V or current input 4-20 mA possible
• 2 freely programmable relay outputs (5 A/230 V)
• 4 digital inputs (e.g. forced ON for overflow control, heating control)
• Sufficiently dimensioned mechanical seal
• Double connection options: 2" (d63) internal and external thread, high-quality IBG screw fittings included in the scope of delivery
• Maximum safety thanks to overpressure and underpressure protection, dry-running protection, protection against input voltage fluctuations
• Water temperature max.: < 40 °C
• Ambient temperature max.: 40 °C
• Max operating pressure: 1.9 bar

Dimensions