Deutsch
English
Product note
This product is available in complete truck quantities (720 pcs.) on request.
Recommended replacement product:
Ocean® system brick EPS 30
The Ocean® Brick is a formwork brick for the construction of individual size.
Ocean® System Brick 300
- Length 1250 mm
divisible in 250 mm sections - Tongue-and-groove
for secure connections - 82 mm
reinforced inner bar - U-value
starting at 0.29
Description
Extra high and wide connecting bars
82 mm reinforced inner bar with stress-optimized transitions to the side walls 
Integrated notch or markings, divisible in 250 mm sections
Shaped inner contour increases stability during filling
54 l concrete volume
The elements, made of expanded polystyrene (EPS), enable the construction of pool walls with precise geometry and high dimensional stability.
Thanks to their design and the integrated connecting elements, the formwork blocks can be efficiently assembled and flexibly adapted to different pool geometries.
Product details
- Tongue-and-groove system with wide connecting bar and reinforced interior sections for high stability.
- Reinforced interior bar (82 mm) with integrated bevels to support even concrete distribution.
- Three integrated guide gutters for positioning reinforcing bars.
- Specially shaped inner contour for optimized concrete flow.
- Thermally insulating EPS construction with a U-value starting at 0.29.
- The thermal insulation properties can reduce heat loss from the pool. The actual effects on heating time and energy consumption depend on pool size, features, usage, and environmental conditions.
- Easy to work with and can be cut in 250-mm increments.
- Suitable for private, hotel, and public pool facilities.
- Available in the EPS25, EPS30, and EPS MAX variants.
- Developed and manufactured in Austria.
Dimensions
| Ocean® Brick | |
|---|---|
| Length (mm) | 1250 |
| Width (mm) | 250 |
| Height (mm) | 300 |
Versions
| Product | Art. Nr. |
|---|---|
| Ocean® System Brick EPS 25 | 7301114 |
| Ocean® System Brick EPS 30 | 7301115 |
| Ocean® System Brick EPS MAX | 7301117 |
Delivery
Delivery is made on disposable pallets.
The number of pallets depends on the order quantity:
- Single pallet: 32 units.
- Full truckload: 720 units (20 pallets of 36 units each).
Quantity table
| Pool size m |
Required pieces* |
ISO elements m² |
EPS plates** m² |
Lining m² |
Edge lfm |
|---|---|---|---|---|---|
| 5 x 3 x 1.5 | 68 | 25.5 | 15 | 40.5 | 16 |
| 5 x 3,5 x 1.5 | 72 | 27 | 17.5 | 44.5 | 17 |
| 5 x 4 x 1.5 | 76 | 28.5 | 20 | 48.5 | 18 |
| 6 x 3 x 1.5 | 76 | 28.5 | 20 | 48.5 | 18 |
| 6 x 3.5 x 1.5 | 80 | 30 | 21 | 51 | 19 |
| 6 x 4 x 4.5 | 84 | 31.5 | 24 | 55.5 | 20 |
| 7 x 3 x 1.5 | 84 | 31.5 | 21 | 52.5 | 20 |
| 7 x 3.5 x 1.5 | 88 | 33 | 24.5 | 57.5 | 21 |
| 7 x 4 x 1.5 | 92 | 34.5 | 28 | 62.5 | 22 |
| 8 x 3.5 x 1.5 | 96 | 36 | 28 | 64 | 23 |
| 8 x 4 x 1.5 | 100 | 37.5 | 32 | 69.5 | 24 |
| 9 x 4 x 1.5 | 108 | 40.5 | 36 | 76.5 | 26 |
| 9 x 5 x 1.5 | 116 | 43.5 | 45 | 88.5 | 28 |
| 10 x 4 x 1.5 | 116 | 43.5 | 40 | 83.5 | 28 |
| 10 x 5 x 1.5 | 124 | 46.5 | 50 | 96.5 | 30 |
* The quantities given do not include any additional elements. The quantities of elements required for the construction of the technical shaft and access stairs must be calculated and ordered separately
** non-slip version for the pool floor area, 100 x 500 x 5 cm
Notes
- For each pool size, an additional 40 Ocean® Brick inserts are required.
- Information on other pool sizes is available upon request.
- Customization of the lettering on the inner wall is available upon request.
Safety Notice
The structural design, particularly the required reinforcement, must be reviewed and determined by a qualified construction company. Requirements may vary depending on site conditions such as slope, groundwater level, or soil properties.