Ocean® pool pump Inver iQ 300, 2.2 kW, up to 30 m³/h, 230 V, IE4 motor, variable speed, self-priming, large pre-filter, low-noise, MODBUS-RTU, suitable for salt electrolysis, IP55

Ocean pool pump Inver iQ 300

• variable speed
  inverter pump
• IE4 motor
  extremly quiet
• MODBUS RTU
  for external control
• analogue signal
  0-10 V or 4-20 mA

Description

The self-priming Ocean® Inver iQ 300 pool pump is equipped with inverter technology, is infinitely variable and can be operated at variable speed. The pump can be used for various pool sizes.

The new IE4 permanent magnet motor is low-noise and highly efficient. Compared to a conventional ON/OFF pump, energy savings of up to 82 % can be achieved.

The sensorless and brushless design of the motor extends the service life of the bearings and mechanical parts.

The pump is equipped with MODBUS-RTU and therefore has an open interface for integration into iQnnect and smart home systems.

The pump can also be controlled by devices from our Aquastar series via its digital inputs. This allows you to utilise benefits such as demand-based filter performance during filtering and backwashing.

Alternatively, the control unit can also be installed up to 30 m away from the pump (minimum cable cross-section 4 x 2.5 mm²).

Product details

	Inver iQ 300
P1 (kW)	2.53
P2 rated power (kW)	2.20
P2 rated power (HP)	3.00
I max. (A)	10.5
Flow rate* (m³/h)	up to 30
Voltage 50/60 Hz (V)	230
Water Connection	2" IT and ET
Noise level (db)	< 45
Protection class	IP55
Efficiency class	IE4
Art.Nr.	7301537

Delivery head: Inver iQ 300

Features

• Highly efficient, sensorless and brushless IE4 motor
• Pump housing made of glass fibre reinforced plastic
• Large pre-filter (4.6 litres) incl. 2-part transparent lid with key for easy opening
• 4 daily filter cleaning programmes, individually configurable
• Stainless steel screws and stainless steel shaft
• Stepless regulation
• Low noise level
• Self-priming
• Suitable for salt electrolysis (< 7 g/l)
• Error message for dirty pre-filter
• Input for NTC temperature sensor
• Ready to plug in
• Volume flow up to 30 m³/h at 10 m
• Volume flow control
• 2 drains
• IP55
• External control via MODBUS-RTU, analogue input 0-10 V or current input 4-20 mA possible
• 2 freely programmable relay outputs (5 A/230 V)
• 4 digital inputs (e.g. forced ON for overflow control, heating control)
• Sufficiently dimensioned mechanical seal
• Double connection options: 2" (d63) internal and external thread, high-quality IBG screw fittings included in the scope of delivery
• Maximum safety thanks to overpressure and underpressure protection, dry-running protection, protection against input voltage fluctuations
• Water temperature max.: < 40 °C
• Ambient temperature max.: 50 °C
• Max operating pressure: 2.2 bar

Dimensions