For heating of the pool water
- Low pressure loss
- High efficiency
- Absolute frost-proof (when piping ist empty)
- Completely walkable
- Easy installation
- Suitable for Praher Plastics solar controls
- For suitable PVC piping material, see the PVC products chapter
TECHNICAL DATA
- Material: HDPE
- Pressure loss ca. 0.003 bar at 200 l/h/m2
- Flow rate: 150–250 l/m2/h
- Weight: approx. 6 kg/m2 – water volume: 6 l/m2
- Test pressure: 4.5 bar
- Operation pressure: bis 1.2 bar bei 40 °C
- Efficiency: up to approx. 85 %
- Capacity: up to 0.85 kWh/m2
- Temperature resistant at idle running: from -50 °C up to +115 °C
- Pipe: Ø 40 mm