Deutsch
English
Rollgum spray adhesive Tack S 22.1 l
- Spray application
fast & safe processing - 22.1 l
canister
Description
Rollgum Tack S 22.1 l is a contact-based, sprayable adhesive specially developed for the secure bonding of EPDM and TPO membranes to various substrates such as concrete, wood, masonry, metal, and other suitable materials.
Excellent aging behavior. Excellent adhesion. Good cold and heat resistance.
Product details
Technical data
| Rollgum spray adhesive Tack S 22.1 l | |
|---|---|
| Solid content: | 37.5 % ± 2 |
| Dynamic viscosity: | 325 – 425 mPa·s spindle 4 20 rpm at 20°C |
| Boiling point: | > 35°C |
| Auto-ignition temperature: | > 200°C |
| Drying time: | Between 10 and 20 minutes, depending on ambient conditions. |
| Density: | 0.84 g/cm³ |
| Color: | Green |
| Container size: | 22.1 l canister |
Notes
- It is recommended to store the adhesive at a temperature between 10°C and 30°C.
- The recommended room temperature for processing is between 5°C and 40°C.
- It is not recommended to work at substrate temperatures (substrate and membrane) above 50 – 60°C.
- Shake the adhesive container vigorously before and during use.
- The surfaces must be clean, smooth, dry, and free of dust and sharp edges.
- Although good adhesion occurs quickly, full adhesive strength is only achieved after 48 to 72 hours.