Rollgum SA Flashing 18" self-adhesive strip
Description
The Rollgum SA Flashing 457 mm (18") self-adhesive membrane consists of a non-reinforced EPDM membrane with a thickness of 1.5 mm, which is fully laminated onto a self-adhesive tape. The reverse side is equipped with a weather-resistant protective film that is easy to remove.
The Rollgum SA Flashing strip can be used to cover details where a vulcanized EPDM seal is required: curves, upstands, gutters, repairs to EPDM roofs, repairs to metal roofs, gullies, and protruding pipes.
Product details
- High weather resistance, ozone and UV resistant
- Flexibility at extreme temperatures
- Can be used at temperatures between -20°C and 50°C
- Good adhesion to suitable substrates
Technical data
Swipe/scroll to see all columns
EPDM membrane | Self-adhesive strip | |
---|---|---|
Base: | EPDM | Rubber polymer |
Color: | Black | Black |
Solvent: | None | None |
Solids: | 100 % | 100 % |
Condition: | Cross-linked | Cross-linked |
Material thickness: | 1.5 mm | 0.5 mm |
Width: | 457 mm | 460 mm |
Length: | 15.25 m | 15.25 m |
Processing
- Preparation: Before applying Rollgum Primer, the surface must be clean, dry, and free of aggressive elements. If the product has been exposed to temperatures below 15°C for a prolonged period, it must be brought to room temperature before use.
- Bonding: Place the strip on the dried primer, remove the protective film, and press down evenly with a silicone roller. Apply the tape in only one or two dimensions, i.e., flat or with only one change of direction.
- Sealing: Seal visible edges with Rollgum BOND007.
Notes
- At low temperatures (<15°C), heating with hot air is recommended to ensure optimum formability.
- Store the tape in its original packaging, unopened, in a covered, ventilated place at temperatures between 15°C and 25°C. The material must be kept dry and must not be exposed to direct sunlight until installation.
- The expiration date is 12 months if the tape is stored under the conditions mentioned above. Check the date of manufacture on each roll. The actual expiration date of the product depends directly on how it has been stored and handled. For example, storage at high temperatures can shorten the period of use with optimal results.