Deutsch
English
Rollgum BOND007 EPDM adhesive
- Excellent adhesion
without primer - Adheres underwater
and in wet conditions - Fast curing
with minimal shrinkage
Description
Rollgum BOND007 adhesive sealant and sealer is a single-component, elastic adhesive and sealant with a hybrid base – ideal for bonding and sealing Rollgum EPDM membranes to each other and to various substrates (e.g., concrete, metal, brick). Also suitable for other EPDM materials.
Product details
- Excellent adhesion without primer – even on damp surfaces
- Weather, UV, and aging resistant
- Fast skin formation (approx. 45 min.), minimal shrinkage
- Temperature resistant from –40°C to +90°C
- Solvent-, silicone-, and isocyanate-free (low VOC value <20 g/l)
- Can be painted over (preliminary test recommended)
- Can be used indoors, outdoors, and underwater
Technical data
| Rollgum BOND007 | |
|---|---|
| Density: | ca. 1.62 g/ml |
| Skin formation: | approx. 45 min. |
| Curing: | 2 – 3 mm / 24 h |
| Elongation at break: | >500 % |
| Shore A hardness: | approx. 47 |
| Package size: | 290 ml cartridge |
| Coverage: | Coverage depends on bead thickness and width (e.g., approx. 12.5 m with a width of 8 mm and a thickness of 3 mm) |
Application
- Joining and sealing EPDM sealing membranes
- Repairing cracks, joints, penetrations
- Ideal for ponds, canals, tanks, pipes, etc.
- Can be used on absorbent and non-absorbent substrates
Processing
Apply to a clean surface using a cartridge gun. For EPDM seam bonding, overlap by at least 100 mm with two parallel strands. Curing depends on environmental conditions. Avoid mechanical stress during the first 7 days.