Ocean® pool pump Inver iQ 300, 2.2 kW, up to 30 m³/h, 230 V, IE4 motor, variable speed, self-priming, large pre-filter, low-noise, MODBUS-RTU, suitable for salt electrolysis, IP55

Ocean pool pump Inver iQ 300

• Variable speed
  inverter pump
• IE4 Motor
  noise-optimized
• MODBUS RTU
  for external control
• Ready to plug in
  product

Description

The self-priming Ocean® Inver iQ 300 pool pump features integrated inverter technology and stepless speed control. Operation can be adapted to different requirements and pool sizes.

The pump is equipped with an IE4 permanent magnet motor and is designed for continuous use in pool applications. The sensorless and brushless design ensures low-wear operation of the drive components.

The integrated MODBUS-RTU interface allows the pump to be integrated into iQnnect, building automation, and smart home systems. Additionally, various options are available for external control and connection of other components.

The pump can also be controlled via devices from the Aquastar series using the digital inputs. This allows you to take advantage of features such as demand-based filter performance during filtration and backwashing.

Alternatively, the control unit can be mounted up to 30 m away from the pump (minimum cable cross-section: 4 x 2.5 mm²).

Product details

	Inver iQ 300
P1 (kW)	2.53
P2 rated power (kW)	2.20
P2 rated power (HP)	3.00
I max. (A)	10.5
Flow rate* (m³/h)	up to 30
Voltage 50/60 Hz (V)	230
Water Connection	2" IT and ET
Noise level (db)	< 45
Protection class	IP55
Efficiency class	IE4
Art.Nr.	7301537

Delivery head: Inver iQ 300

Features

• IE4 permanent magnet motor
• Sensor-based and brushless drive technology
• Pump housing made of glass-fiber-reinforced plastic
• Large pre-filter (4.6 l)
• Two-piece transpaent lid with opening aid
• 4 individually configurable filter programs
• Stainless steel screws and stainless steel shaft
• Stepless speed control
• Noise-optimized operation
• Self-priming design
• Suitable for salt electrolysis systems up to < 7 g/l
• Alert when pre-filter is dirty
• Input for NTC temperature sensor
• Plug-and-play design
• Flow rate up to 30 m³/h at 10 m head
• Flow rate control
• Two drain outlets
• IP55 protection rating
• External control via MODBUS-RTU, 0–10 V signal, or 4–20 mA signal
• Two freely programmable relay outputs
• Four digital inputs
• Robust mechanical seal
• Connection via 2" (d63) male and female threads
• Protection against dry running, overpressure, and underpressure
• Maximum water temperature < 40 °C
• Maximum ambient temperature 50 °C
• Maximum operating pressure 2.2 bar

Dimensions