For installation of an Aquastar® easy or comfort onto a Praher manual valve with old sealing system.
1. Turn handle to position „filter“
2. Take the bolt out of the handle
3. Loosen the connection of the Aquastar® actuator
4. Put the connector on the arbor „locking“ has to point to „filter“
5. Fix the connector to the arbor with the bolt
6. Put the adapter on the connector (label has to be readable)
7. Put the Aquastar® onto the connector and fix it with the M10 screw (do not tighten too much!)
8. Start the Aquastar® according to the manual
Only to use for installation of an Aquastar® „Comfort“ or „Easy“ onto a manual Praher valve 1 ½", 2", or 3" with old sealing system! No other use allowed!