PERAQUA/SALE/SALE pool control systems products

iQntrol-N1 Niveau Control 0,00 €

Thu, 09 Apr 2026 07:28:23 +0200

With switch OFF, automatic and test

iQntrol-P1 Filter Control 0,00 €

Thu, 09 Apr 2026 07:28:21 +0200

Without temperature control, with or without motor protection

Galvanic water level sensor made of plastic/V4a 0,00 €

Thu, 09 Apr 2026 07:28:20 +0200

iQntrol-P5 Backwash Set 0,00 €

Thu, 09 Apr 2026 07:28:18 +0200

For automatic backwash, 24V AC/DC, filte control and heating control

iQntrol-N2 Splash Tank Control 0,00 €

Thu, 09 Apr 2026 07:28:16 +0200

Microprocessor water flow control for swimming pools with overflow edge. Works e.g. together with the iQntrol-N2 probe set. Contains intelligent functions such as probe monitoring and fill-time monitoring, power-saving function for the filter pump. All outputs are potential-free changeover contacts, therefore suitable for any pool control. Potential-free fault message output for the control technology.

iQntrol-P4 Filter Control 0,00 €

Thu, 09 Apr 2026 07:28:14 +0200

Incl. Solar control and backwash control. Filter control for 230V or 400V pump with automatic backwash, heating controller and solar controller with priority for the sun. Remote control via cable or modem, SMS error dispatch, protection functions, directly connectable piston valves for filter backwashing, universal input, waterproof housing with transparent cover, etc. Just like the iQntrol-P5, the iQntrol-P4 has integrated the automatic backwash, since all the electronics are in the controller you just need an Aquastar MP6 plc and the right cable (both not included in the control).

iQntrol-P5 Complete Swimming Pool Control 230V and 400V 0,00 €

Thu, 09 Apr 2026 07:28:11 +0200

Pool all-rounder for solar, heating, water level, backwash, oxygen disinfection, 400V or 230V filter system. Simple operation, remote maintenance, ASCII interface to bus systems, SMS-Arlamierung in case of investment errors, Whirlpool operation, universal inputs / outputs, energy saving functions, use of synergies for resource-saving intelligent control, splashproof, information key to read what is going on, watch with 10 years power reserve, waterproof housing with transparent lid etc. Attention: without sensor, without valves, without probes and cables

Under-wall remote control unit for iQntrol-P4 and iQntrol-P5 0,00 €

Thu, 09 Apr 2026 07:28:10 +0200

Under-wall remote control unit for iQntrol-P4 and iQntrol-P5

Description

With this under-wall remote control unit, the iQntrol-P4 and iQntrol-P5 control units can be conveniently operated remotely - even if the pool control unit is mounted inaccessibly in the plant room.

Very simple installation: A small electronics box is fitted to the swimming pool control unit, which is connected to the remote maintenance socket on the control unit. The remote control unit is then connected to the electronics box via a Cat5 network cable.

The remote control unit is supplied with electricity via the network cable with safety extra-low voltage. This means that no additional cables are required.

All functions of the control unit can be used via the remote control unit. The control unit can still be operated locally.

Product details

Flush-mounted housing with anodized aluminium frame.
Large, backlit plain text display with high contrast.
End user mode, in which only the most important settings are accessible. The rest is protected by a password.
Acoustic signals make operation even more intuitive.
The INFO button tells you what is running and why.
Display of all temperatures, switching statuses, pump current, times, etc.
Speed buttons for uncomplicated operation. Signal lamps for a good overview.
Easy installation in any wall (brick, concrete, plasterboard). Installation opening: 165 x 165 mm, depth: 72 mm.

iQntrol-S1 Solar Control with manual adjustment Tmax. (20-40°C) and Tdiff. 0,00 €

Thu, 09 Apr 2026 07:28:08 +0200

Connection cable with connection clamps for AQUASTAR MP6 0,00 €

Thu, 09 Apr 2026 07:28:06 +0200

Connection cable with connection clamps for AQUASTAR MP6

Description

Connection cable for connecting an iQntrol pool or backwash controller to an AQUASTAR MP6 backwash valve.

Very simple installation: Insert the modular plug into the socket of the control unit and attach the connecting wires to the screw terminals provided on the AQUASTAR MP6. That's it! The backwash valve can now be controlled via the control unit.

Suitable for AQUASTAR MP6 models with 1 ½" and 2". Length 5 m.