PERAQUA/Pool Control Systems/Pool Controls products

iQmfort pool control sets Complete 0,00 €

Tue, 06 Oct 2026 15:15:32 +0200

iQmfort pool control set Complete

Upgradekit
for iQntrol Complete systems
Automation
of key functions
App monitoring
for a detailed overview

Description

With the iQmfort Pool Control Kit Complete and an iQntrol DOS-Complete REDOX/CLF or SALT-Complete water treatment system, you can upgrade your pool system to a fully automated iQmfort Pool.

The iQmfort Pool Control Set Complete expands the functions of the iQntrol Complete water treatment system to include:

Automatic backwashing via the AQUASTAR easy II backwash valve
Automatic water level control via a float switch (skimmer pool) or level sensor (overflow pool) and solenoid valve
Temperature monitoring and control via the integrated temperature sensor
Control of the Ocean Inver iQ300 filter pump
App monitoring of pH, redox, chlorine levels, temperature, and chemical levels
Notifications via the app in case of malfunctions

Available for skimmer and overflow pools.

Product details

Components

AquaStar Easy 2 for V6 ND 1 ½" + 2", 100 - 240 VAC
Solenoid valve made of brass ½", 230 VAC, normally closed
Float switch or water level sensor
Ocean® pool pump Inver iQ 300, 2.2 kW, up to 30 m³/h
Transparent vaccination line, 4 x 1/4" threads, d50/63
Lovibond® Scuba3s multiparameter pool tester for monitoring relevant water parameters.

Technical Data

Available for skimmer and overflow pools
For pool sizes up to 60 m³ (AT, DE) or 50 m³ (CH)

Versions

Product	Art. Nr.
iQmfort pool control set Skimmer pool Complete	7301813
iQmfort pool control set Overflow pool Complete	7301814

Loxone® AQUASTAR® Air 0,00 €

Fri, 16 Oct 2026 06:46:38 +0200

Description

The Loxone® AQUASTAR® Air is an automated 6-way backwash valve for pool operation and supports the following operating modes: Filter, Backwash, Rinse, Circulate, Drain, Closed.

The device also features a “Winter Mode”.

Product details

IP65 protection rating
Electric actuator: 100 to 240 V AC
Electric actuator: 100–240 V AC
Direct connection for 2- or 3-way EO510 electric ball valves
Can be retrofitted to many common filter systems using Praher side-mount or top-mount valves
Visualization and operation via the Loxone® Miniserver on compatible devices
Updates via the Loxone® Miniserver

Interfaces

1-Wire input for temperature sensors
1 analog input, 0.5 to 5 V
1 analog input, 0 to 10 V
3 relay outputs, 250 VAC / 5 A, for flexible use
Loxone® Air technology for wireless communication with the Loxone® Miniserver
Direct pump connection (250 V AC, 8 A)

Expansion options

When used with a Loxone® Miniserver, the AQUASTAR® Air can be integrated into a Loxone® system. This allows pool and building functions to be controlled and automated together.

Possible applications:

Integration of counter-current systems
Control of pool lighting
Integration of pool lighting into existing building concepts
Joint control of home and pool technology, such as shading, alarm systems, or music systems
Functions for demand-based control of pool systems, such as the pool pump or heating functions, in conjunction with suitable system components

Note: Actual operating and consumption values depend on the specific system configuration, usage, and the installed components.

Scope of delivery

Loxone® AQUASTAR® Air
1-Wire Temperature Sensor
SMA Antenna 868 MHz

Operating Requirements

A Loxone® Miniserver is required for the setup and operation of the Loxone® AQUASTAR® Air.

The Loxone® Miniserver is not included in the scope of delivery and is available separately from Loxone® or authorized Loxone® partners.

iQnnect software complete packages 0,00 €

Fri, 18 Sep 2026 07:07:00 +0200

iQnnect software complete packages

Description

The iQnnect complete software packages consist of a Loxone© Config file for the Loxone© Miniserver. All the essential functions of a pool are pre-programmed in the config file. This makes the installation of the pool system particularly efficient and simple.

The Loxone© Aquastar© Air serves as the basis, as it establishes the connection to the individual pool components with its inputs and outputs. On this basis, automatic backwashing, filter pump control and level control are possible. The integration of the water treatment system is also already prepared.

Tip: For efficient integration, we recommend setting up a separate miniserver for the pool area. If a miniserver is already installed in the home automation system, we recommend a gateway client variant.

Product details

For salt electrolysis systems or chlorine dosing
Versions for skimmer or overflow pool
Tried and tested software
Supplied on USB stick

Versions

Produkt	Art. Nr.
iQnnect software complete package for skimmer pools with iQntrol dosing system DOS-COMPLETE/DOS-NET	7301785
iQnnect software complete package for skimmer pools with iQntrol salt electrolysis system SALT-COMPLETE	7301786
iQnnect software complete package for overflow pools with iQntrol dosing system DOS-COMPLETE/DOS-NET	7301787
iQnnect software complete package for overflow pools with iQntrol salt electrolysis system SALT-COMPLETE	7301788
iQnnect software complete package for skimmer pools with iQntrol dosing system DOS-MODBUS	7301449
iQnnect software complete package for skimmer pools with iQntrol salt electrolysis system SALT-MODBUS	7301450
iQnnect software complete package for overflow pools with iQntrol dosing system DOS-MODBUS	7301451
iQnnect software complete package for overflow pools with iQntrol salt electrolysis system SALT-MODBUS	7301452

Pool Control-P6 AQUASTAR® Control with pressure sensor 0,00 €

Thu, 08 Oct 2026 11:07:20 +0200

the Aquastar Control® is a fully automated backwash system for the Praher Plastics® 6 way backwash valve in sizes 1 ½“, 2” and 3”. With its intelligent electronic control system and easy-to-read display it provides perfect clarity and numerous fully automatic functions on a single unit for use in swimming pools as well as commercial and industrial water purification. The Aquastar can also be programmed to suit individual requirements.

FEATURES

Automation of 6-way valves 1½“, 2" and 3" from Praher Plastics® Austria
A lifting and rotating actuator with control functions
24V AC/ DC and 100 265V AC
Real RTC with 10 year battery
Easy to retrofit
Operation with display and buttons included into the cover
Automated backwash trigger
Automated pump trigger
Level control
Temperature or solar control
Error Handling integrated
Relays with gold contacts
Configurable relays
Configurable digital inputs
Protection IP65
Optical position indicator
Additional position CLOSED
Additional position Winter