PERAQUA/Filter Pumps/Ocean® pumps products

Ocean® pool pump Vario iQ 150 0,00 €

Wed, 08 Apr 2026 07:40:11 +0200

Ocean pool pump Vario iQ 150

Variable speed
inverter pump
IE4 motor
extremly quiet
MODBUS RTU
interface
Ready to plug in
product

Description

The self-priming Ocean® Vario iQ 150 pool pump is equipped with inverter technology, is infinitely variable and can be operated at variable speed. The pump can be used for various pool sizes.

The IE4 permanent magnet motor is low-noise and highly efficient. Compared to a conventional ON/OFF pump, energy savings of up to 82 % can be achieved.

The sensorless and brushless design of the motor extends the service life of the bearings and mechanical parts.

The pump is equipped with a MODBUS-RTU interface.

The pump can also be controlled by devices from our Aquastar series via its digital inputs. This allows you to utilise benefits such as demand-based filter performance during filtering and backwashing.

Alternatively, the control unit can also be installed up to 30 m away from the pump (minimum cable cross-section 4 x 2.5 mm²).

The difference to the Ocean® Inver iQ 300 pool pump, apart from the performance, is also in the control: With the Vario iQ 150, only the speed can be controlled, and not the volume flow as with the Inver iQ 300.

Product details

Swipe/scroll to see all columns

	Vario iQ 150
P1 (kW)	1.1
P2 rated power (kW)	1.28
P2 rated power (HP)	1.74
I max. (A)	10.5
Flow rate* (m³/h)	bis 21
Voltage 50/60 Hz (V)	230
Water Connection	2" IG und AG
Noise level (db)	~ 45
Protection class	IP55
Efficiency class	IE4
Art.Nr.	7301854

* at 10 m

Delivery head: Vario iQ 150

Features

Highly efficient, sensorless and brushless IE4 motor
Pump housing made of glass fibre reinforced plastic
Large pre-filter (4.6 litres) incl. 2-part transparent lid with key for easy opening
4 daily filter cleaning programmes, individually configurable
Stainless steel screws and stainless steel shaft
Stepless regulation
Low noise level
Self-priming
Suitable for salt electrolysis (< 7 g/l)
Error message for dirty pre-filter
Input for NTC temperature sensor
Ready to plug in, Cable length: 2.5 m
Volume flow up to 21 m³/h at 10 m
Speed control
2 drains
IP55
MODBUS-RTU, analogue input 0-10 V or current input 4-20 mA possible
2 freely programmable relay outputs (5 A/230 V)
4 digital inputs (e.g. forced ON for overflow control, heating control)
Sufficiently dimensioned mechanical seal
Double connection options: 2" (d63) internal and external thread, high-quality IBG screw fittings included in the scope of delivery
Maximum safety thanks to overpressure and underpressure protection, dry-running protection, protection against input voltage fluctuations
Water temperature max.: < 40 °C
Ambient temperature max.: 40 °C
Max operating pressure: 1.9 bar

Dimensions

	iQ 150
Length (mm)	625
Height (mm)	322
Width (mm)	216
Height connection front (mm)	216
Height connection top (mm)	322

Ocean® pool pump Inver iQ 300 0,00 €

Tue, 14 Apr 2026 12:42:08 +0200

Ocean pool pump Inver iQ 300

Variable speed
inverter pump
IE4 motor
extremly quiet
MODBUS RTU
for external control
Ready to plug in
product

Description

The self-priming Ocean® Inver iQ 300 pool pump is equipped with inverter technology, is infinitely variable and can be operated at variable speed. The pump can be used for various pool sizes.

The new IE4 permanent magnet motor is low-noise and highly efficient. Compared to a conventional ON/OFF pump, energy savings of up to 82 % can be achieved.

The sensorless and brushless design of the motor extends the service life of the bearings and mechanical parts.

The pump is equipped with MODBUS-RTU and therefore has an open interface for integration into iQnnect and smart home systems.

Alternatively, the control unit can also be installed up to 30 m away from the pump (minimum cable cross-section 4 x 2.5 mm²).

Product details

Swipe/scroll to see all columns

	Inver iQ 300
P1 (kW)	2.53
P2 rated power (kW)	2.20
P2 rated power (HP)	3.00
I max. (A)	10.5
Flow rate* (m³/h)	up to 30
Voltage 50/60 Hz (V)	230
Water Connection	2" IT and ET
Noise level (db)	< 45
Protection class	IP55
Efficiency class	IE4
Art.Nr.	7301537

Delivery head: Inver iQ 300

Features

Highly efficient, sensorless and brushless IE4 motor
Pump housing made of glass fibre reinforced plastic
Large pre-filter (4.6 litres) incl. 2-part transparent lid with key for easy opening
4 daily filter cleaning programmes, individually configurable
Stainless steel screws and stainless steel shaft
Stepless regulation
Low noise level
Self-priming
Suitable for salt electrolysis (< 7 g/l)
Error message for dirty pre-filter
Input for NTC temperature sensor
Ready to plug in
Volume flow up to 30 m³/h at 10 m
Volume flow control
2 drains
IP55
External control via MODBUS-RTU, analogue input 0-10 V or current input 4-20 mA possible
2 freely programmable relay outputs (5 A/230 V)
4 digital inputs (e.g. forced ON for overflow control, heating control)
Sufficiently dimensioned mechanical seal
Double connection options: 2" (d63) internal and external thread, high-quality IBG screw fittings included in the scope of delivery
Maximum safety thanks to overpressure and underpressure protection, dry-running protection, protection against input voltage fluctuations
Water temperature max.: < 40 °C
Ambient temperature max.: 50 °C
Max operating pressure: 2.2 bar

Dimensions

	iQ 300
Length (mm)	625
Height (mm)	322
Width (mm)	216
Height connection front (mm)	216
Height connection top (mm)	322

Ocean® pool pump series O 0,00 €

Sun, 12 Apr 2026 14:41:47 +0200

Ocean pool pump series O

IE3 motor
low noise level
<7 g/l
suitable for salt water
large pre-filter
incl. 2-part lid

Description

The self-priming Ocean® pump series O for pools achieves a very high filtration performance. The particularly large pre-filter (4.6 l) offers high filter quality and requires significantly less cleaning compared to conventional filter pumps.

The polycarbonate lid of the pre-filter is transparent and makes maintenance easier.

The O series filter pump is designed so that there is no possible electrical contact with the water.

Product details

Swipe/scroll to see all columns

	O50		O75		O100		O150		O200		O300
P1 (kW)	0.53	0.49	0.74	0.70	0.97	0.92	1.38	1.33	1.84	1.78	2.64	2.54
P2 rated power (kW)	0.37	0.37	0.55	0.55	0.75	0.75	1.10	1.10	1.50	1.50	2.20	2.20
P2 rated power (HP)	0.50	0.50	0.75	0.75	1.00	1.00	1.50	1.50	2.00	2.00	3.00	3.00
I max. (A)	4.2	1.7	5.0	2.0	5.5	2.2	7.3	2.9	9.2	3.5	12.2	5.0
Flow rate* (m³/h)	11,1	11,1	13,5	13,5	18	18	21	21	24	24	29	29
Voltage 50 Hz (V)	230	400	230	400	230	400	230	400	230	400	230	400
Water Connection	2" IG+AG	2" IG+AG	2" IG+AG	2" IG+AG	2" IG+AG	2" IG+AG	2" IG+AG	2" IG+AG	2" IG+AG	2" IG+AG	2" IG+AG	2" IG+AG
Noise level (db)	66	66	66	66	67	67	68	68	68	68	69	69
Protection class	IP55	IP55	IP55	IP55	IP55	IP55	IP55	IP55	IP55	IP55	IP55	IP55
Efficiency class	IE3	IE3	IE3	IE3	IE3	IE3	IE3	IE3	IE3	IE3	IE3	IE3
Plug-in ready: **	yes	yes	yes	yes	yes	yes	yes	yes	no	no	no	no
Art.-Nr.	7301525	7301526	7301527	7301528	7301529	7301530	7301531	7301532	7301533	7301534	7301535	7301536

* at 10 m | ** cable length: 2.5 m

Pump characteristics

Delivery head: Ocean series O

Features

Highly efficient IE3 engine, single or three phase
Available in six different sizes, from 0.5 to 3 HP
Large pre-filter (4.6 l) including 2-part lid with key for easy opening
Housing made of glass fiber reinforced plastic
Double connection options: internal and external thread 2” (d63), high-quality IBG fittings included in the scope of delivery
Single-phase models (7301525, 7301527, 7301529, 7301531) are supplied ready to plug in
Mechanical seal made of AISI-316 stainless steel
Cataphoretic dip painting
Stainless steel screws and stainless steel shaft
Protection class IP55
2 drains
Suitable for salt electrolysis (< 7g/l)

Dimensions

	Series O
Length (mm)	625
Height (mm)	322
Width (mm)	216
Height connection front (mm)	216
Height connection top (mm)	322

Ocean® pool pump control ECO 0,00 €

Wed, 08 Apr 2026 07:39:59 +0200

Ocean pool pump control ECO

speed control
3-stage

Description

Pump control ECO for retrofitting of 3-phase pumps.

Enables automatic control of filter times, release of salt electrolysis systems or heat pumps, forced ON/OFF function for overflow pools, etc.

Product details

4 daily filter cleaning programs can be individually configured
Power supply 1-phase, 230 V
3-stage speed control (700 - 2800 r.p.m.)
2 freely programmable relay outputs (5 A/230 V)
2 digital inputs
NTC temperature sensor
Contains the necessary protective measures for the pump (dry running protection and overload protection)