Ocean® System Brick 300 0,00 €

Thu, 22 Oct 2026 15:07:11 +0200

Ocean® System Brick 300

Length 1250 mm
divisible in 250 mm sections
Tongue-and-groove
for secure connections
82 mm
reinforced inner bar
U-value
starting at 0.29

Description

Extra high and wide connecting bars
82 mm reinforced inner bar with stress-optimized transitions to the side walls
Integrated notch or markings, divisible in 250 mm sections
Shaped inner contour increases stability during filling
54 l concrete volume

The elements, made of expanded polystyrene (EPS), enable the construction of pool walls with precise geometry and high dimensional stability.

Thanks to their design and the integrated connecting elements, the formwork blocks can be efficiently assembled and flexibly adapted to different pool geometries.

Product details

Tongue-and-groove system with wide connecting bar and reinforced interior sections for high stability.
Reinforced interior bar (82 mm) with integrated bevels to support even concrete distribution.
Three integrated guide gutters for positioning reinforcing bars.
Specially shaped inner contour for optimized concrete flow.
Thermally insulating EPS construction with a U-value starting at 0.29.
The thermal insulation properties can reduce heat loss from the pool. The actual effects on heating time and energy consumption depend on pool size, features, usage, and environmental conditions.
Easy to work with and can be cut in 250-mm increments.
Suitable for private, hotel, and public pool facilities.
Available in the EPS25, EPS30, and EPS MAX variants.
Developed and manufactured in Austria.

Dimensions

	Ocean® Brick
Length (mm)	1250
Width (mm)	250
Height (mm)	300

Versions

Product	Art. Nr.
Ocean® System Brick EPS 25	7301114
Ocean® System Brick EPS 30	7301115
Ocean® System Brick EPS MAX	7301117

Delivery

Delivery is made on disposable pallets.

The number of pallets depends on the order quantity:

Single pallet: 32 units.
Full truckload: 720 units (20 pallets of 36 units each).

Quantity table

Swipe/scroll to see all columns

Pool size m	Required pieces*	ISO elements m²	EPS plates** m²	Lining m²	Edge lfm
5 x 3 x 1.5	68	25.5	15	40.5	16
5 x 3,5 x 1.5	72	27	17.5	44.5	17
5 x 4 x 1.5	76	28.5	20	48.5	18
6 x 3 x 1.5	76	28.5	20	48.5	18
6 x 3.5 x 1.5	80	30	21	51	19
6 x 4 x 4.5	84	31.5	24	55.5	20
7 x 3 x 1.5	84	31.5	21	52.5	20
7 x 3.5 x 1.5	88	33	24.5	57.5	21
7 x 4 x 1.5	92	34.5	28	62.5	22
8 x 3.5 x 1.5	96	36	28	64	23
8 x 4 x 1.5	100	37.5	32	69.5	24
9 x 4 x 1.5	108	40.5	36	76.5	26
9 x 5 x 1.5	116	43.5	45	88.5	28
10 x 4 x 1.5	116	43.5	40	83.5	28
10 x 5 x 1.5	124	46.5	50	96.5	30

* The quantities given do not include any additional elements. The quantities of elements required for the construction of the technical shaft and access stairs must be calculated and ordered separately
** non-slip version for the pool floor area, 100 x 500 x 5 cm

Notes

For each pool size, an additional 40 Ocean® Brick inserts are required.
Information on other pool sizes is available upon request.
Customization of the lettering on the inner wall is available upon request.

Safety Notice

The structural design, particularly the required reinforcement, must be reviewed and determined by a qualified construction company. Requirements may vary depending on site conditions such as slope, groundwater level, or soil properties.

Ocean® Brick System, Insertion Part 0,00 €

Thu, 22 Oct 2026 15:07:11 +0200

The solid connection of the Ocean® Bricks was realized by the tongue and groove junction. This minimizes the risk of leak of concrete during the filling process. The strong tongue and groove junction with 25 mm height and 20 mm width fit together and provide stability. The inserts interlock with the next brick, even at 90° edges

PERAQUA/Swimming Pool Liners & Smart Polystyrene Bricks/Ocean® Brick System products

Ocean® System Brick 300 0,00 €